| Sign In | Join Free | My burrillandco.com |
|
1 Years
ABB AC 800M Controller Hardware
A single PM862 AC 800M processor kit with TP830 baseplate, two Control Network ports, CEX-Bus expansion and electrical plus optical ModuleBus.
ABB PM862K01, article 3BSE076940R1, is a single AC 800M processor kit with a 67 MHz CPU, TP830 baseplate and the hardware listed in ABB's official package. ABB confirms use from System 800xA 6.0.2 and Compact Control Builder 6.0.0-1 onward.
| Model / article number | PM862K01 / 3BSE076940R1 |
|---|---|
| Package configuration | Single processor kit |
| Processor type / clock | MPC866 / 67 MHz |
| Performance, 1,000 Boolean operations | 0.18 ms |
| Memory | 32 MB |
| Application program cycle time | Down to 1 ms |
| Power supply | 24 VDC; permitted range 19.2–30 VDC |
ABB states that this processor is compatible with System 800xA 6.0.2 and Compact Control Builder 6.0.0-1 onward. Confirm the installed controller firmware and engineering environment before replacement; no direct replacement or migration equivalence is asserted here.
| Official kit contents | PM862 CPU; TP830 baseplate; TB850 CEX-Bus terminator; TB807 ModuleBus terminator; TB852 RCU-Link terminator; memory-backup battery 4943013-6 |
|---|---|
| License | Not included |
| Single-CPU I/O connection | 1 electrical + 7 optical ModuleBus clusters |
| Redundant conversion | Use the ABB-defined redundant package/architecture; electrical ModuleBus is not used with redundant CPUs |
Inspect the TP830, grounding contact, locking mechanism and ventilation clearance before mounting the CPU.
Verify 24 VDC at L+/L− and check the SA/SB redundant power-supply status inputs where they are used.
Record the Ethernet address on the TP830 and confirm CN1/CN2 network assignment before restoring the project.
Useful when the installed BOM calls for the same article and software baseline; confirm the kit contents as well as the CPU label.
An older engineering station or unsupported controller release can block firmware or application work. Verify the ABB minimum releases before shutdown.
Check the internal lithium battery, its installation history and the external SB821/SB822 option if fitted.
| Internal battery backup time | At least 158 hours |
|---|---|
| Ethernet channels | 2 × RJ45 Control Network ports |
| Serial interfaces | COM3 RS-232C, 75–19,200 baud; isolated COM4 service port, 9,600 baud |
| ModuleBus capacity | Up to 96 I/O modules in single-CPU configuration; 84 in redundant configuration |
| Dimensions (W × H × D) | 119 × 186 × 135 mm |
| Operating temperature | 0 to +55 °C (+32 to +131 °F) |
Commercial supply support, separate from ABB technical documentation.
Practical supply support from inventory review to dispatch.
Part number and visible condition reviewed.
Available testing stated on the quotation.
Protective packing and prompt issue review.
Terms confirmed before the order is placed.
These part numbers are independent purchasing references only. They are not replacements for the product on this page. Compatibility and stock must be confirmed separately for each item.
ABB specifies System 800xA 6.0.2 and Compact Control Builder 6.0.0-1 or later.
The official kit contains the CPU, TP830, TB850, TB807, TB852 and memory-backup battery; no license is included.
Yes in a single-CPU configuration: one electrical cluster and seven optical clusters are supported.
Use the isolated COM4 service port, then download the released firmware before loading the application.
No. It is a single-processor kit; redundancy requires the ABB-defined second processor, RCU/CEX links and optical I/O arrangement.
Provide the part number, quantity, destination, required date, machine/system model, software release, existing TP830 details and nameplate photos.
For a faster technical and commercial check, send the installed-part details before the requested ship date.
Email Miya Zheng|
|
